Universal windscreen heater switch kit, ideal for the RX7 or RX8. Small discrete steel button to active the relay timer. Kit complete with Maxi fuse holder, Maxi fuse holder bracket and Maxi 30amp fuse.
find out more

RX7 heater switch kit

£72.85

Mazda RX7 windscreen heater switch kit. Using genuine Maxda RX7 FD switch for that factory fitment look, Kit complete with Maxi fuse holder, Maxi fuse holder bracket and Maxi 30amp fuse.
find out more

Heated rear screen switch

£41.03

Genuine Mazda RX7 FD heated rear screen switch, can also be used for the heated front screens we offer.
find out more

Maxi fuse holder

£7.64

Maxi fuse holder 4-6 mm
find out more

Best Sellers

Carbonetic Single pro carbon clutch Mazda RX7 FD3S

£955.45

Carbonetic Single pro carbon clutch Mazda RX7 FD3S. Complete inc lightened flywheel.
Choice of 2 clamping force plates 1300kg or 1600kg
Approx 500 bhp rating
There is a massive 5.25 kg weight saving between an Exedy single clutch and this Carbonetics clutch.
find out more

Carbonetic Blade for Mazda RX7 FD3S

£323.13

Carbonetic BLADE has been developed to provide an uprated clutch, with a stock feel at an OEM price. Clutches dont get any better than this. Specifically designed to fit in to your already fitted stock cover of your Mazda RX7 FD3S.
Approx BHP rating to 440bhp.
find out more

Carbonetic S-Spec front pad for RX7 FD

£119.15

Carbonetic S-Spec front pad for RX7 FD3S
CARBONETIC SUPER STREET pad is designed to improve overall braking performance of any street vehicles. SUPER STREET pad is developed for street and light track use where initial stopping power and resistance to fade is of prime importance. In addition to reducing brake dust and squeal, these long-lasting pads help keep rotor wear to minimum.

Applicable Rotor Temp
0-500 degrees C
Friction Coefficient
0.32-0.42
find out more

Magnecor 8mm leads for mazda RX7 FD 8bit UK

£46.99

Magnecor 8mm leads for mazda RX7 FD 8bit UK
Original equipment replacement.Designed to improve original ignition system performance on road vehicles using either electronic engine management systems or carburetors.Ideal for LPG gas conversion engines.Excellent RFI and EMI suppression.Flexible high-strength all silicone construction.
These are almost identical in length to the 16bit but have a straight cap where it connects to the coils.
Lead lengths approx, centre of cap to centre of cap each end.
T1 = 22cm, T2 = 28cm
L1 = 28cm, L2 = 33cm
find out more

RotaryArt full block kit

£178.06

RotaryArt full block kit: comprising of coolant seals, 4 inner and 4 outer square, dowell O rings 4 total , front cover O ring 1 total, oil filter base O rings 2 total, 20 total thrubolt O rings, rear stationary gear O ring 1 total and the oil control O rings 4 inner green and 4 outer black.

find out more

East Caost Parts 13b 2mm ALS Apex seals

£362.02

East Caost Parts 13b 2mm ALS Apex seals. Designed to be unbreakable so no engine damage if it lets go under pressure and designed to compliment there lightweight billet rotors.
find out more

Fuel pump 044

£111.63

Bosch in tank fuel pump, should push 200 ltrs per hr & will support up to approx 600 bhp
find out more

Used Front drivers seat.

Used Front drivers seat, carbon fibre effect material or velour. and leather
find out more

Mazda RX8 ignition coil

£64.63

Genuine Mazda RX8 ignition coil. These are a known problem for their short life span, and some customers now treat these as a consumable, checking them at every service. Priced each, all four should be checked.
We are now able to offer these at almost half the Mazda recommended retail price and on average you will save approx £170 on a set.
find out more

Visit our new forum www.rotarycommunity.com

Used parts cars and bikes

Online Catalogue | Used parts cars and bikes

Used Mazda parts & cars

There is a massive range of parts available for most of the popular models, please mail your enquiries if you cant see what you're looking for, sometimes there are just simply too many parts to list, so just the most popular requests get shown.
We have added a wanted section so you can request to other rotary enthusiats parts you are looking for or maybe able to sell on.
We have a section for race and track only cars, trailers and now a stolen car database to help track and trace stolen rotary's.
Advertising cars for sale, wanted parts and to have your car listed on our stolen database are totally free.

Used NSU RO80 parts & cars

The NSU Ro 80 was a technologically advanced large sedan-type automobile produced by the German firm of NSU from 1967 until 1977. Most notable was the powertrain; a 113 bhp (84 kW; 115 PS), 995 cc twin-rotor Wankel engine driving the front wheels through a semi-automatic transmission employing an innovative vacuum system. It was voted Car of the Year for 1968 by European motoring writers.

Used Citroen parts & cars

Together with NSU, Citroën founded Comobil and Comotor to introduce the Wankel engine in regular production cars. While NSU introduced the RO 80, Citroën tested the marked with the special M 35 prototype. 260 of these cars were sold only to preferred customers. With a total of 30 million kilometers the Citroën engineers had acquired enough experience before introducing Citroën's first mass produced Wankel engined car : The GS birotor. This twin rotored engine develops 107 DIN hp at 6500 rpm and is a supersmooth performer with only one problem : a thirst for fuel. The 1973 fuel crisis put an end to the life of this car and Citroën was taken over by Peugeot.

Used Corvette parts & cars

In 1970, Chevrolet obtained a licence for the Wankel RCE from NSU and began building a two-rotor and a 4-rotor Corvette. A fibreglass model is approved in June 1971 by GM Pres. Ed Cole.
On Jan. 14, 1972, a chassis was shipped to Pininfarina, Turin, Italy so that the body could be constructed by the famed design studio. In June of the same year, a 2 rotor Corvette with a steel body was viewed by GM management. The same year GM commissioned a two-rotor version of the XP-882 and built it as the XP-987GT.
In January 1973, a Corvette body was built for an experiment four-rotor car. By April, the GALCIT wind tunnel in California was used to test the aerodynamic qualities of the 4-rotor Corvette.

Used Mercedes parts & cars

Conceived in the late nineteen-sixties, the C 111 was first used to develop the new Wankel engine concept. Felix Wankel's radical rotary engine was seen as a potential successor to the piston engine and Mercedes

Used misc parts

Used Trailers

Stolen Rotary's

Hopefully this section will never grow too big.
I will add stolen rotary cars to this data base for all customers, traders, tuners & police to keep track on whats missing. Should anyone be approached or asked to move on parts or cars that are suspicious check here first.

Used cars & run arounds

Online Catalogue | Used parts cars and bikes

Visit our new forum www.rotarycommunity.com