RoTechniks for many years have bought in bulk, 1000 ltr totes of quality mineral oils for rotary cars.
Now these savings can be passed on in convenient 5 ltrs bottles.

API SL/CF4 - ACEA A3, B3, B4 - VW 505.00 - MB229.1
find out more

Oil line clips

£26.59

Genuine Mazda oil line clips, these are the M shaped springs that snap the oil lines on and securely hold them in place.
find out more

RX8 exhaust gasket

£8.38

Genuine Mazda exhuast gasket, flat ring that fits between bottom of manifold and front of CAT
find out more

RX8 exhaust doughnut gasket

£24.56

Genuine Mazda exhuast gasket, doughnut shaped ring that fits between bottom of CAT and front of rear silencer
find out more

Best Sellers

Carbonetic Single pro carbon clutch Mazda RX7 FD3S

£1,011.33

Carbonetic Single pro carbon clutch Mazda RX7 FD3S. Complete inc lightened flywheel.
Choice of 2 clamping force plates 1300kg or 1600kg
Flywheel Weight 4.5KG
Complete 9.1 KG
Approx 500 bhp rating
There is a massive 5.25 kg weight saving between an Exedy single clutch and this Carbonetics clutch.
Please allow 800 miles for bedding in.
find out more

Carbonetic Blade for Mazda RX7 FD3S

£332.74

Carbonetic BLADE has been developed to provide an uprated clutch, with a stock feel at an OEM price. Clutches dont get any better than this. Specifically designed to fit in to your already fitted stock cover of your Mazda RX7 FD3S.
Approx 400 bhp rating. Blade disc 1.45KG
find out more

Carbonetic S-Spec front pad for RX7 FD

£122.96

Carbonetic S-Spec front pad for RX7 FD3S
CARBONETIC SUPER STREET pad is designed to improve overall braking performance of any street vehicles. SUPER STREET pad is developed for street and light track use where initial stopping power and resistance to fade is of prime importance. In addition to reducing brake dust and squeal, these long-lasting pads help keep rotor wear to minimum.

Applicable Rotor Temp
0-500 degrees C
Friction Coefficient
0.32-0.42
find out more

Magnecor 8mm leads for mazda RX7 FD 8bit UK

£46.99

Magnecor 8mm leads for mazda RX7 FD 8bit UK
Original equipment replacement.Designed to improve original ignition system performance on road vehicles using either electronic engine management systems or carburetors.Ideal for LPG gas conversion engines.Excellent RFI and EMI suppression.Flexible high-strength all silicone construction.
These are almost identical in length to the 16bit but have a straight cap where it connects to the coils.
Lead lengths approx, centre of cap to centre of cap each end.
T1 = 22cm, T2 = 28cm
L1 = 28cm, L2 = 33cm
find out more

RotaryArt full block kit

£178.06

RotaryArt full block kit: comprising of coolant seals, 4 inner and 4 outer square, dowell O rings 4 total , front cover O ring 1 total, oil filter base O rings 2 total, 20 total thrubolt O rings, rear stationary gear O ring 1 total and the oil control O rings 4 inner green and 4 outer black.

find out more

East Caost Parts 13b 2mm ALS Apex seals

£362.02

East Caost Parts 13b 2mm ALS Apex seals. Designed to be unbreakable so no engine damage if it lets go under pressure and designed to compliment there lightweight billet rotors.
find out more

5ltr Dexelia Ultra 5w30

£41.03

Dexelia oils are the only oil recognised by Mazda for the use in there RX8. Any other oil could void the manufacturers warentee.
find out more

RoTechniks 10w40 mineral oil

£14.98

Mazda RX8 ignition coil

£64.63

Genuine Mazda RX8 ignition coil. These are a known problem for their short life span, and some customers now treat these as a consumable, checking them at every service. Priced each, all four should be checked.
We are now able to offer these at almost half the Mazda recommended retail price and on average you will save approx £170 on a set.
find out more

Visit our new forum www.rotarycommunity.com

Used Mazda RX5 parts

Online Catalogue | Used parts cars and bikes | Used Mazda parts & cars | Used Mazda RX5 parts

Used Mazda RX5 interior

Sell your spares to a world wide audience of enthusiasts looking for that special item to finish there projects. Its no win no fee, if I can't sell your goods, you still have the goods to move on else where. We take 10% from the sold value on parts. Transaction fees are deducted if paid for using Paypal. The balance is transferred to you. There are no time restraints.

Used Mazda RX5 ext & body styling

Used Mazda RX5 engine, perf, tuning

Used Mazda RX5 misc parts

Used Mazda RX5 cars

Send to us up to 10 pictures of your car for sale, we will add your own section with pictures and description. Show your car of to a world wide audience, potential customers can visit here and not have to trail through hundreds of threads to find what they are looking for and no bumping to the top. Cars are advertised FREE.

Used Mazda RX5 parts wanted

We are receiving an ever increasing list of requests for spares and parts for all rotary cars, this is quiet time consuming for us to take the requests process them and send out to our contacts to see if we have or can source parts, with several mails back and forth. Hopefully this new section will help a bigger crowd of enthusiasts that are looking for parts or maybe enthusiasts that have spare they want to sell on to others.
Send your wanted list to us with part numbers, detailed description of what it is you are looking for and photo, we will post it in the relevant section FREE.

Mazda RX-5

The Mazda RX-5 was an automobile model which was produced from 1975 through 1980. It was a small luxury sporty coupe intended to compete with the Ford Thunderbird and similar vehicles. It was called Rx-5 in Australia, and 'Mazda Cosmo in the Japanese and American market .

It shared much of its mechanicals with the Mazda RX-4, with the addition of rear 5 link coil suspension and rear disc brakes. JDM models were available with the 12A engine but all overseas models used the 13B engine, which had by that time been debugged from the problem of failed combustion chamber seals, but still had a high frequency of gasket failures between the aluminum and iron sections of the engine housing, due to differential thermal expansion of the dissimilar metals.

It was extremely popular in Japan, due to its American style and high performance and luxury, but sold only in limited numbers in rest of the world. The RX-5 was retired in the American Mazda lineup to make room for the new 1979 Mazda RX-7.

A related RX-6 model was offered in some markets with the same bodyshell and premise.

Mazda RX-5 1975 - 1981

The second generation CD Cosmo appeared in 1975 and lasted until 1981. It was known as the Cosmo AP in Japan, and sold internationally as the Mazda RX-5, though in some export markets its piston powered counterpart was called the Mazda 121 (a name later applied to Mazda's subcompact model). Mazda America used the Mazda Cosmo name and offered it from 1976 through 1978. The CD Cosmo/RX-5 series was a flop internationally as Mazda tried too hard to "Americanize" the car. It was however an enormous success in Japan where over 55,000 where sold in the first year alone. Due to its poor sales as an export, the series-II version from 79-81 was not exported and remained on domestic sale only.

The Cosmo was Mazda's 'large' compact rotary coupe and based on the Mazda RX-4 floorpan and mechanics, but slightly heavier due to body design and more luxurious appointments, including an 5-link rear suspension and rear disc brakes. It was available with the 12A and 13B engines.

The Cosmo was affectionately referred to as the Japanese Grand Prix, and indeed was fitted out to compete with that class of American road cruisers. With the standard manual transmission, it was a surprisingly quick and responsive car to drive - as proven to the chagrin of many comparable sporty coupe drivers. Comfortable and well-equipped, it suffered from the bane of many Japanese automobiles (and American as well) of the period - poor rust-proofing and premature rusting. The rotary engine responded in an almost rheostat mode once it was above 2500 rpm, smoothly and quickly winding to the red line.

A piston engine version, the Cosmo 1800, used a 1769 cc (80x88 mm) straight-4 SOHC engine that produced 100 hp (75 kW) and 110 ft·lbf (149 N·m).

Dimensions:

Wheelbase: 2510 mm
Front Track: 1380 mm
Rear Track: 1370 mm
Length: 4470 mm
Width: 1680 mm
Weight: 1120 kg

Mazda RX-5 1982 - 1989

The third generation HB Cosmo from 1982 shared the Mazda HB chassis with its twin, the Mazda Luce. The Cosmo name was available on a coupe, hardtop and sedan body. Its equal Mazda Luce variant was not available in coupe form. The HB Cosmo/Luce was the only car in automotive history to option all three forms of Automotive engine. Piston, Diesel and Rotary.

Mazda offered three versions of rotary engine for the HB series. A 12A-SPI, 12A-turbo and 13B-RESI. The latter available with automatic transmission only. The 1982 12A-turbo Cosmo coupe was officially the fastest production car in Japan at one stage.

The HB Cosmo was sold with its rotary engine option in Japan only. The sedan variant was replaced in 1986, but the Cosmo soldiered on unchanged until 1989.

Curtisy of Wikipedia

The free encyclopedia that anyone can edit.
Wikipedia

Online Catalogue | Used parts cars and bikes | Used Mazda parts & cars | Used Mazda RX5 parts

Visit our new forum www.rotarycommunity.com