Universal windscreen heater switch kit, ideal for the RX7 or RX8. Small discrete steel button to active the relay timer. Kit complete with Maxi fuse holder, Maxi fuse holder bracket and Maxi 30amp fuse.
find out more

RX7 heater switch kit

£72.85

Mazda RX7 windscreen heater switch kit. Using genuine Maxda RX7 FD switch for that factory fitment look, Kit complete with Maxi fuse holder, Maxi fuse holder bracket and Maxi 30amp fuse.
find out more

Heated rear screen switch

£41.03

Genuine Mazda RX7 FD heated rear screen switch, can also be used for the heated front screens we offer.
find out more

Maxi fuse holder

£7.64

Maxi fuse holder 4-6 mm
find out more

Best Sellers

Carbonetic Single pro carbon clutch Mazda RX7 FD3S

£955.45

Carbonetic Single pro carbon clutch Mazda RX7 FD3S. Complete inc lightened flywheel.
Choice of 2 clamping force plates 1300kg or 1600kg
Approx 500 bhp rating
There is a massive 5.25 kg weight saving between an Exedy single clutch and this Carbonetics clutch.
find out more

Carbonetic Blade for Mazda RX7 FD3S

£323.13

Carbonetic BLADE has been developed to provide an uprated clutch, with a stock feel at an OEM price. Clutches dont get any better than this. Specifically designed to fit in to your already fitted stock cover of your Mazda RX7 FD3S.
Approx BHP rating to 440bhp.
find out more

Carbonetic S-Spec front pad for RX7 FD

£119.15

Carbonetic S-Spec front pad for RX7 FD3S
CARBONETIC SUPER STREET pad is designed to improve overall braking performance of any street vehicles. SUPER STREET pad is developed for street and light track use where initial stopping power and resistance to fade is of prime importance. In addition to reducing brake dust and squeal, these long-lasting pads help keep rotor wear to minimum.

Applicable Rotor Temp
0-500 degrees C
Friction Coefficient
0.32-0.42
find out more

Magnecor 8mm leads for mazda RX7 FD 8bit UK

£46.99

Magnecor 8mm leads for mazda RX7 FD 8bit UK
Original equipment replacement.Designed to improve original ignition system performance on road vehicles using either electronic engine management systems or carburetors.Ideal for LPG gas conversion engines.Excellent RFI and EMI suppression.Flexible high-strength all silicone construction.
These are almost identical in length to the 16bit but have a straight cap where it connects to the coils.
Lead lengths approx, centre of cap to centre of cap each end.
T1 = 22cm, T2 = 28cm
L1 = 28cm, L2 = 33cm
find out more

RotaryArt full block kit

£178.06

RotaryArt full block kit: comprising of coolant seals, 4 inner and 4 outer square, dowell O rings 4 total , front cover O ring 1 total, oil filter base O rings 2 total, 20 total thrubolt O rings, rear stationary gear O ring 1 total and the oil control O rings 4 inner green and 4 outer black.

find out more

East Caost Parts 13b 2mm ALS Apex seals

£362.02

East Caost Parts 13b 2mm ALS Apex seals. Designed to be unbreakable so no engine damage if it lets go under pressure and designed to compliment there lightweight billet rotors.
find out more

Fuel pump 044

£111.63

Bosch in tank fuel pump, should push 200 ltrs per hr & will support up to approx 600 bhp
find out more

Used Front drivers seat.

Used Front drivers seat, carbon fibre effect material or velour. and leather
find out more

Mazda RX8 ignition coil

£64.63

Genuine Mazda RX8 ignition coil. These are a known problem for their short life span, and some customers now treat these as a consumable, checking them at every service. Priced each, all four should be checked.
We are now able to offer these at almost half the Mazda recommended retail price and on average you will save approx £170 on a set.
find out more

Visit our new forum www.rotarycommunity.com

TORQline

Our tried and tested composite propshafts are rapidly growing in popularity, and are now being used worldwide in Sportscar, GT, and Touring Car championships.
Our composite pressure vessels have been used in F1 for several seasons, and continue to offer perfect reliability and superb weight savings over other materials.
Carbon Props

Rotaryart

Rotaryart are now our exclusive distributors for our new carbon propshafts, developed with them for cars running a torque rating up to 3000 (NM).
-The composite prop will save 2.15kg over the standard solution, a massive 35% less than stock. Although this does not sound astonishing at a first glance it is rotating inertia (mass) we are saving and should provide a noticeable benefit to the driver. This will help during hard acceleration and pickup, it may also have a positive effect during heavy braking scenarios due to the reduced rotating mass to slow down.
-The composite prop will also add to the dampening of the driveline. Where high tuned car produce massive torque spikes that can damage gearboxes, diff etc. The CTG TORQline composite prop will actually twist slightly and absorb much of the shock loading into other components, it will also smooth the delivery of the power to the wheels. Carbon Prop Benefits

CTG

Crompton Technology Group Ltd is a high performance engineering company.
We are specialists in the development and production of Advanced Composite components, for a range of high technology industries.
Marketing composite products and services into diverse industries including;
- Aerospace
- Automotive
- Motorsport
- Subsea
- General industrial sectors
- Medical imaging

Aerospace

Components range from space flight hardware for use in research projects on the International Space Station to stealthy materials that allow aircraft to operate in hostile environments undetected.

Medical

CTG has won supplier of the year awards for 1998, 1999 and 2000 from a major customer by manufacturing components to aerospace standard within this industry.
Our unrivalled experience in developing and manufacturing cryogenic and non-cryogenic suspension straps and struts puts us at the forefront of this industry.

Visit our new forum www.rotarycommunity.com