Online Catalogue

View Basket | Checkout | Items:, Value:

spacer
spacer

New Products

RX8 side seals

RX8 side seals

Genuine Mazda RX8 side seals.
The RX8 rotor comes with letters on the side face, this determines the length. These are to fit numbers F, G, H & I

find out more

£26.39

Mazda RX7 FD3S front drop link (L)

Mazda RX7 FD3S front drop link (L)

RotaryArt front drop link left hand side - near side for Mazda RX7 FD3S.

find out more

£38.36

Mazda RX7 FD3S front drop link (R)

Mazda RX7 FD3S front drop link (R)

RotaryArt front drop link right hand side - off side for Mazda RX7 FD3S.

find out more

£38.36

RX8 side seals (extra long)

RX8 side seals (extra long)

Alternatively these side seals are the longest which you would HAVE to clearance yourself to fit. So if unsure of the lettering on your rotors or if using RX8 rotors in early 13B conversions you can use and clearence these yourself.

find out more

£27.26

Steering shaft UJ (upper)

Steering shaft UJ (upper)

Genuine Mazda RX7 FD3S upper steering colum UJ. This part has a sliding section and pin that is designed to break on an impact and often wears out and breaks. This will sharpen steering and remove excessive play.

find out more

£135.98

RX8 side seals

RX8 side seals

Genuine Mazda RX8 side seals.
The RX8 rotor comes with letters on the side face, this determines the length. These are to fit numbers J, K, L & M

find out more

£21.24

spacer

Visit our forum www.rotarycommunity.com

Rotaryart fuel & oil products

Online Catalogue | Engine & performance | Fuels & lubricants |  Rotaryart fuel & oil products

Fuel rails tested

Fuel rails tested

We have used our rails on some of the top race cars in the UK and both have exceeded expectations, so we are confident that these wil give you a new level of performance over other rail manufacturers.

Fastest drag RX7 in Europe

Fastest drag RX7 in Europe

Chris is now officailly the fastest street legal rotary in the UK. On 26th Oct 2008 Chris smashed the UK record and powered his way to the finish line in 9.00 secs @ 151mph.

Tony's Nippon Challenge

Tony's Nippon Challenge

Dispite being anywhere between 200-400bhp down on most of the grid Tony has proven the car and his drivers skills with consistant 2nd place finishes.

New fittings
We now ship these with new fittings, The 90 degree elbow now allows for more flexibility when installing and is even better value for money on our easy install fuel rails.
RoTechniks 10w40 mineral oil

RoTechniks 10w40 mineral oil


Price: £12.75 (£15.30 Including VAT at 20%)


Need a oil filter

Filter

RoTechniks for many years have bought in bulk, 1000 ltr totes of quality mineral oils for rotary cars.
Now these savings can be passed on in convenient 5 ltrs bottles.

API SL/CF4 - ACEA A3, B3, B4 - VW 505.00 - MB229.1

RotaryArt Fuel rail in silver

RotaryArt Fuel rail in silver


Price: £180.00 (£216.00 Including VAT at 20%)

Designed for the RX7 13b, Rotaryart's own design fuel rails have been specifically designed for quick installation, you do not have to remove the plenum to install, giving you savings on labour charges. All bolts & fixings supplied. Anodised to keep its finish. There are no O rings to leak and have fiments for easy instalation to existing OE fuel lines. Mazda use 8mm fuel lines but you can have optional extra fitments from 10mm to 14mm, please make sure your system will support larger fiments.

RotaryArt Fuel rail in black

RotaryArt Fuel rail in black


Price: £180.00 (£216.00 Including VAT at 20%)

Designed for the RX7 13b, Rotaryart's own design fuel rails have been specifically designed for quick installation, you do not have to remove the plenum to install, giving you savings on labour charges. All bolts & fixings supplied. Anodised to keep its finish. There are no O rings to leak and have fiments for easy instalation to existing OE fuel lines. Mazda use 8mm fuel lines but you can have optional extra fitments from 10mm to 14mm, please make sure your system will support larger fiments.

RotaryArt Fuel rail in blue

RotaryArt Fuel rail in blue


Price: £180.00 (£216.00 Including VAT at 20%)

Designed for the RX7 13b, Rotaryart's own design fuel rails have been specifically designed for quick installation, you do not have to remove the plenum to install, giving you savings on labour charges. All bolts & fixings supplied. Anodised to keep its finish. There are no O rings to leak and have fiments for easy instalation to existing OE fuel lines. Mazda use 8mm fuel lines but you can have optional extra fitments from 10mm to 14mm, please make sure your system will support larger fiments.

RotaryArt Fuel rail in red

RotaryArt Fuel rail in red

OUT OF STOCK


Price: £180.00 (£216.00 Including VAT at 20%)

Designed for the RX7 13b, Rotaryart's own design fuel rails have been specifically designed for quick installation, you do not have to remove the plenum to install, giving you savings on labour charges. All bolts & fixings supplied. Anodised to keep its finish. There are no O rings to leak and have fiments for easy instalation to existing OE fuel lines. Mazda use 8mm fuel lines but you can have optional extra fitments from 10mm to 14mm, please make sure your system will support larger fiments.

RotaryArt Fuel rail in gold

RotaryArt Fuel rail in gold

OUT OF STOCK


Price: £180.00 (£216.00 Including VAT at 20%)

Designed for the RX7 13b, Rotaryart's own design fuel rails have been specifically designed for quick installation, you do not have to remove the plenum to install, giving you savings on labour charges. All bolts & fixings supplied. Anodised to keep its finish. There are no O rings to leak and have fiments for easy instalation to existing OE fuel lines. Mazda use 8mm fuel lines but you can have optional extra fitments from 10mm to 14mm, please make sure your system will support larger fiments.

RotaryArt Fuel rail package

RotaryArt Fuel rail package

Fuel pump


injectors


colour

Choose a fuel rail in any colour, choose a Bosch 040 or 044 pump & get 2 x 1600 Bosch injectors and you have the start of a awesome fuel upgrade.

M8 to M6 male-male fitting

M8 to M6 male-male fitting


Price: £4.00 (£4.80 Including VAT at 20%)

Spare M8 to M6 male to male stainless steel fuel rail fittings

M8 washer with rubber gasket

M8 washer with rubber gasket


Price: £1.00 (£1.20 Including VAT at 20%)

Spare M8 stainless steel washer with rubber gasket/ O ring built in

90 degree brass elbow

90 degree brass elbow


Price: £17.50 (£21.00 Including VAT at 20%)

Spare M6 90 degree brass elbow made from brass so as to seal with fuel against harder stainless fitting, with self sealing joint.

RotaryArt Rotor shaped oil cap

RotaryArt Rotor shaped oil cap


Price: £25.53 (£30.64 Including VAT at 20%)

colour

RotaryArt Anodised ali oil cap, cast in the shape of a rotor.

Online Catalogue | Engine & performance | Fuels & lubricants |  Rotaryart fuel & oil products

Visit our forum www.rotarycommunity.com

spacer
spacer