Online Catalogue

View Basket | Checkout | Items:, Value:

spacer
spacer

New Products

RX8 side seals

RX8 side seals

Genuine Mazda RX8 side seals.
The RX8 rotor comes with letters on the side face, this determines the length. These are to fit numbers F, G, H & I

find out more

£26.39

Mazda RX7 FD3S front drop link (L)

Mazda RX7 FD3S front drop link (L)

RotaryArt front drop link left hand side - near side for Mazda RX7 FD3S.

find out more

£38.36

Mazda RX7 FD3S front drop link (R)

Mazda RX7 FD3S front drop link (R)

RotaryArt front drop link right hand side - off side for Mazda RX7 FD3S.

find out more

£38.36

RX8 side seals (extra long)

RX8 side seals (extra long)

Alternatively these side seals are the longest which you would HAVE to clearance yourself to fit. So if unsure of the lettering on your rotors or if using RX8 rotors in early 13B conversions you can use and clearence these yourself.

find out more

£27.26

Steering shaft UJ (upper)

Steering shaft UJ (upper)

Genuine Mazda RX7 FD3S upper steering colum UJ. This part has a sliding section and pin that is designed to break on an impact and often wears out and breaks. This will sharpen steering and remove excessive play.

find out more

£135.98

RX8 side seals

RX8 side seals

Genuine Mazda RX8 side seals.
The RX8 rotor comes with letters on the side face, this determines the length. These are to fit numbers J, K, L & M

find out more

£21.24

spacer

Visit our forum www.rotarycommunity.com

RotaryArt Exhausts for Mazda RX7 FD3S

Online Catalogue | Engine & performance | Induction & Exhaust | RotaryArt Exhaust systems |  RotaryArt Exhausts for Mazda RX7 FD3S

RoTechniks RX7 Exhuast with 4 inch single round outlet

RoTechniks RX7 Exhuast with 4 inch single round outlet


Price: £291.93 (£350.32 Including VAT at 20%)

RoTechniks designed RX7 rear silencer, big single round 4 inch outlet. Made from Stainless Steel and designed for performance and sound. A much cheaper alternative than Mazdas rear exhuast and frees up a few extra bhp while looking good and sounding great.

RoTechniks RX7 Exhuast with 4.5 inch single rotor shaped outlet

RoTechniks RX7 Exhuast with 4.5 inch single rotor shaped outlet

OUT OF STOCK


Price: £325.00 (£390.00 Including VAT at 20%)

RoTechniks designed RX7 rear silencer, big single rotor shaped 4.5 inch outlet. Made from Stainless Steel and designed for performance and sound. A much cheaper alternative than Mazdas rear exhuast and frees up a few extra bhp while looking good and sounding great.

In Development, coming soon

RoTechniks RX7 Exhuast with twin 3 inch rotor shaped outlets

RoTechniks RX7 Exhuast with twin 3 inch rotor shaped outlets


Price: £330.00 (£396.00 Including VAT at 20%)

RoTechniks designed RX7 rear silencer, twin 3 inch rotor shaped outlets. Made from Stainless Steel and designed for performance and sound. A much cheaper alternative than Mazdas rear exhuast and frees up a few extra bhp while looking good and sounding great.

RoTechniks RX7 Exhuast with twin 3 inch round shaped outlets

RoTechniks RX7 Exhuast with twin 3 inch round shaped outlets


Price: £330.00 (£396.00 Including VAT at 20%)

RoTechniks designed RX7 rear silencer, twin 3 inch round shaped outlets. Made from Stainless Steel and designed for performance and sound. A much cheaper alternative than Mazdas rear exhuast and frees up a few extra bhp while looking good and sounding great.

Rotor shaped tail pipe ends

Rotor shaped tail pipe ends


Price: £45.00 (£54.00 Including VAT at 20%)

Rotor shaped tail pipe ends, made exclusively for RotaryArt and designed by RoTechniks rotary engineering specialists.
Nicely rounded edges on a 3 inch (76mm) outlet.
Internal fixing diameter 60mm

Round tail pipe ends

Round tail pipe ends


Price: £45.00 (£54.00 Including VAT at 20%)

Round tail pipe ends, made exclusively for RotaryArt and designed by RoTechniks rotary engineering specialists.
Nicely rounded edges on a 3 inch (76mm) outlet.
Internal fixing diameter 60mm

DB readings for twin outlet

DB readings for twin outlet

We used a total stock FD for our tests, leaving the stock downpipe. Then used a DB meter at 45 degrees to the exhaust at approx 1 meter distance. Idel and 3/4 revs

RoTechniks straight through cat replacement pipe and RoTechniks twin tail pipe back box.
At idle 78.5 DB
At 5000rpm 89 DB

RoTechniks silenced cat replacement pipe and RoTechniks twin tail pipe back box.
At idle 76 DB
At 5000rpm 86 DB
As soon as we have a single turbo to test we will post the results.
Enlarge picture

RoTechniks RX7 CAT replacement

RoTechniks RX7 CAT replacement


Price: £129.06 (£154.87 Including VAT at 20%)

RoTechniks designed RX7 CAT replacement, straight through 4 inch mid-section. Made from Stainless Steel and designed for performance and sound. Free up those lost BHP's

RoTechniks RX7 CAT replacement silenced mid pipe

RoTechniks RX7 CAT replacement silenced mid pipe


Price: £147.54 (£177.05 Including VAT at 20%)

RoTechniks designed RX7 CAT replacement, silenced 4 inch mid-section. Made from Stainless Steel and designed for performance and sound. Free up those lost BHP's and helping with the noise limits on track.

RoTechniks RX7 CAT mid pipe

RoTechniks RX7 CAT mid pipe

OUT OF STOCK


Price: £300.00 (£360.00 Including VAT at 20%)

RoTechniks designed RX7 CAT mid section, straight through 4 inch mid-section with a 200 cps cat centre.

Online Catalogue | Engine & performance | Induction & Exhaust | RotaryArt Exhaust systems |  RotaryArt Exhausts for Mazda RX7 FD3S

Visit our forum www.rotarycommunity.com

spacer
spacer