Online Catalogue

View Basket | Checkout | Items:, Value:

spacer
spacer

New Products

RX8 side seals

RX8 side seals

Genuine Mazda RX8 side seals.
The RX8 rotor comes with letters on the side face, this determines the length. These are to fit numbers F, G, H & I

find out more

£26.39

Mazda RX7 FD3S front drop link (L)

Mazda RX7 FD3S front drop link (L)

RotaryArt front drop link left hand side - near side for Mazda RX7 FD3S.

find out more

£38.36

Mazda RX7 FD3S front drop link (R)

Mazda RX7 FD3S front drop link (R)

RotaryArt front drop link right hand side - off side for Mazda RX7 FD3S.

find out more

£38.36

RX8 side seals (extra long)

RX8 side seals (extra long)

Alternatively these side seals are the longest which you would HAVE to clearance yourself to fit. So if unsure of the lettering on your rotors or if using RX8 rotors in early 13B conversions you can use and clearence these yourself.

find out more

£27.26

Steering shaft UJ (upper)

Steering shaft UJ (upper)

Genuine Mazda RX7 FD3S upper steering colum UJ. This part has a sliding section and pin that is designed to break on an impact and often wears out and breaks. This will sharpen steering and remove excessive play.

find out more

£135.98

RX8 side seals

RX8 side seals

Genuine Mazda RX8 side seals.
The RX8 rotor comes with letters on the side face, this determines the length. These are to fit numbers J, K, L & M

find out more

£21.24

spacer

Visit our forum www.rotarycommunity.com

Performance Tested Seals

Online Catalogue | Engine & performance | Engine |  Performance Tested Seals

Set of 6, 2 piece apex seals 13b, 20b

Set of 6, 2 piece apex seals 13b, 20b


Price: £562.67 (£675.20 Including VAT at 20%)


Performance tested seals have designed two piece apex seals in 2mm and 3mm to take one or two support springs for 13b and 20b rotary engines. These seals are designed to withstand high RPM, high boost and Nitrous Oxide. RX8 rotors just need deepening to take the 13b seals. All seals 2mm & 3mm are equally priced.

Set of 9, 2 piece apex seals 13b, 20b

Set of 9, 2 piece apex seals 13b, 20b


Price: £836.65 (£1,003.98 Including VAT at 20%)


Performance tested seals have designed two piece apex seals in 2mm and 3mm to take one or two support springs for 13b and 20b rotary engines. These seals are designed to withstand high RPM, high boost and Nitrous Oxide. RX8 rotors just need deepening to take the 13b seals. All seals 2mm & 3mm are equally priced.

Set of 6, 2 piece 3mm apex seals 12a

Set of 6, 2 piece 3mm apex seals 12a


Price: £562.97 (£675.56 Including VAT at 20%)

Performance tested seals have designed two piece apex seals in 3mm to take one or two support springs for 12a rotary engines. These seals are designed to withstand high RPM, high boost and Nitrous Oxide.

Performance Tested Seals require an oil additive to be added to the fuel to lubricate the apex seals.

It is recommended that you use a minimum of 1% of oil additive to suit fuel being used. ie. methanol use castor based oil

PTS highly recommends that you do not run your engine lean, as this also reduces lubricant to the seals. PTS seals better than any other seal in the market place therefore create more horse power and more combustion temperature. You will be required to use more fuel to achieve a better burn and quench combustion temperatures. Do not forget, more fuel, more horsepower.
RotaryArt full block gasket kits

RotaryArt full block gasket kits

While your putting your performance parts back in your block you will need a quality gasket kit to hold it atogether.
Full block gasket kit

Online Catalogue | Engine & performance | Engine |  Performance Tested Seals

Visit our forum www.rotarycommunity.com

spacer
spacer