Magnecor 8mm leads for Mazda RX7 FD 16bit import
Original equipment replacement.Designed to improve original ignition system performance on road vehicles using either electronic engine management systems or carburetors.Ideal for LPG gas conversion engines.Excellent RFI and EMI suppression.Flexible high-strength all silicone construction.
These are almost identical in length to the 8bit but have a 90 degree cap where it connects to the coils.
Lead lengths approx, centre of cap to centre of cap each end.
T1 = 23cm, T2 = 29cm
L1 = 31cm, L2 = 35cm
spec sheet and fitting instructions

Magnecor KV85 leads for Mazda RX7 FD 16bit import
Primarily designed for racing engines using racing ignitions,turbocharging and supercharging.Entire jacket made from aerospace extreme heat-resistant silicone rubber.Exclusive Magnecor 2.5mm Metallic
Inductance Suppressed Conductor will suppress EMI indefinitely,allowing this
cable to be used on road vehicles with any ignition and LPG gas conversions.Can be fitted into most original lead holders.
These are almost identical in length to the 8bit but have a 90 degree cap where it connects to the coils.
Lead lengths approx, centre of cap to centre of cap each end.
T1 = 23cm, T2 = 29cm
L1 = 31cm, L2 = 35cm
spec sheet and fitting instructions

Magnecor 10mm leads for Mazda RX7 FD 16bit Import
Designed for racing engines using racing ignitions,supercharging and exotic fuels.Extra large 10mm jacket made from aerospace extreme heat-resistant silicone rubber to provide additional heat protection and insulation. Exclusive Magnecor 2.5mm Metallic Inductance Suppressed Conductor will suppress EMI indefinitely.Can be used on street vehicles if space allows.
Lead lengths approx, centre of cap to centre of cap each end.
T1 = 23cm, T2 = 29cm
L1 = 31cm, L2 = 35cm
spec sheet and fitting instructions

Magnecor 8mm leads for mazda RX7 FD 8bit UK
Original equipment replacement.Designed to improve original ignition system performance on road vehicles using either electronic engine management systems or carburetors.Ideal for LPG gas conversion engines.Excellent RFI and EMI suppression.Flexible high-strength all silicone construction.
These are almost identical in length to the 16bit but have a straight cap where it connects to the coils.
Lead lengths approx, centre of cap to centre of cap each end.
T1 = 22cm, T2 = 28cm
L1 = 28cm, L2 = 33cm
spec sheet and fitting instructions

Magnecor KV85 leads for Mazda RX7 FD 8bit UK
Primarily designed for racing engines using racing ignitions,turbocharging and supercharging.Entire jacket made from aerospace extreme heat-resistant silicone rubber.Exclusive Magnecor 2.5mm Metallic
Inductance Suppressed Conductor will suppress EMI indefinitely,allowing this
cable to be used on road vehicles with any ignition and LPG gas conversions.Can be fitted into most original lead holders.
These are almost identical in length to the 16bit but have a straight cap where it connects to the coils.
Lead lengths approx, centre of cap to centre of cap each end.
T1 = 22cm, T2 = 28cm
L1 = 28cm, L2 = 33cm
spec sheet and fitting instructions

Magnecor 10mm leads for Mazda RX7 FD 8bit UK
Designed for racing engines using racing ignitions,supercharging and exotic fuels.Extra large 10mm jacket made from aerospace extreme heat-resistant silicone rubber to provide additional heat protection and insulation. Exclusive Magnecor 2.5mm Metallic Inductance Suppressed Conductor will suppress EMI indefinitely.Can be used on street vehicles if space allows.
Lead lengths approx, centre of cap to centre of cap each end.
T1 = 22cm, T2 = 28cm
L1 = 28cm, L2 = 33cm
spec sheet and fitting instructions