Carbonetic Single pro carbon clutch Mazda RX7 FD3S. Complete inc lightened flywheel.
Choice of 2 clamping force plates 1300kg or 1600kg
Flywheel Weight 4.5KG
Complete 9.1 KG
Approx 500 bhp rating
There is a massive 5.25 kg weight saving between an Exedy single clutch and this Carbonetics clutch.
Please allow 800 miles for bedding in.
find out more

Carbonetic Blade for Mazda RX7 FD3S

£332.74

Carbonetic BLADE has been developed to provide an uprated clutch, with a stock feel at an OEM price. Clutches dont get any better than this. Specifically designed to fit in to your already fitted stock cover of your Mazda RX7 FD3S.
Approx 400 bhp rating. Blade disc 1.45KG
find out more

Carbonetic S-Spec front pad for RX7 FD

£122.96

Carbonetic S-Spec front pad for RX7 FD3S
CARBONETIC SUPER STREET pad is designed to improve overall braking performance of any street vehicles. SUPER STREET pad is developed for street and light track use where initial stopping power and resistance to fade is of prime importance. In addition to reducing brake dust and squeal, these long-lasting pads help keep rotor wear to minimum.

Applicable Rotor Temp
0-500 degrees C
Friction Coefficient
0.32-0.42
find out more

Magnecor 8mm leads for mazda RX7 FD 8bit UK

£46.99

Magnecor 8mm leads for mazda RX7 FD 8bit UK
Original equipment replacement.Designed to improve original ignition system performance on road vehicles using either electronic engine management systems or carburetors.Ideal for LPG gas conversion engines.Excellent RFI and EMI suppression.Flexible high-strength all silicone construction.
These are almost identical in length to the 16bit but have a straight cap where it connects to the coils.
Lead lengths approx, centre of cap to centre of cap each end.
T1 = 22cm, T2 = 28cm
L1 = 28cm, L2 = 33cm
find out more

RotaryArt full block kit

£178.06

RotaryArt full block kit: comprising of coolant seals, 4 inner and 4 outer square, dowell O rings 4 total , front cover O ring 1 total, oil filter base O rings 2 total, 20 total thrubolt O rings, rear stationary gear O ring 1 total and the oil control O rings 4 inner green and 4 outer black.

find out more

East Caost Parts 13b 2mm ALS Apex seals

£362.02

East Caost Parts 13b 2mm ALS Apex seals. Designed to be unbreakable so no engine damage if it lets go under pressure and designed to compliment there lightweight billet rotors.
find out more

5ltr Dexelia Ultra 5w30

£41.03

Dexelia oils are the only oil recognised by Mazda for the use in there RX8. Any other oil could void the manufacturers warentee.
find out more

1ltr Dexelia Ultra 5w30

£9.20

Dexelia oils are the only oil recognised by Mazda for the use in there RX8. Any other oil could void the manufacturers warentee.
find out more

Mazda RX8 ignition coil

£64.63

Genuine Mazda RX8 ignition coil. These are a known problem for their short life span, and some customers now treat these as a consumable, checking them at every service. Priced each, all four should be checked.
We are now able to offer these at almost half the Mazda recommended retail price and on average you will save approx £170 on a set.
find out more

Visit our new forum www.rotarycommunity.com

Induction & Exhaust

Online Catalogue | Engine & performance | Induction & Exhaust

RotaryArt Exhaust systems

RoTechniks have now after 15 years experience designed a range of new exhaust systems especially for the rotary powered car.
Made from high grade stainless steel and not just designed to look good with their unique rotor shaped tail pipes, but today's increasingly tight noise limits and high performance rotaries.
We have straight through mid pipes, high flow cat replacements, silenced mid pipes and rear boxes with our unique rotor shaped tail ends, for the Mazda RX7 FD3S and RX8.

GReddy Induction

The Greddy Elbow (compression tube) leading into the throttlebody for the 93 - 95 RX-7's. This elbow improves the airflow into the throttlebody giving less restriction.

Heat shielding, wrapping etc

HKS Induction & Exhaust

The HKS name has become synonymous with high quality engineering construction and reliability in the racing, rally and performance car world, as demonstrated by its well integrated, quick expanding and revolutionary product range.
Induction and exhaust sytems for Rotary cars, RX7 and RX8

K&N Filters

Every Intake Kit we design has been tested on a Dynamometer and proven to increase horsepower. We measure horsepower at the wheels. K&N worlds finest air and oil filters. All rotary cars catered for from RX2, RX3, RX4, RX7 to RX8, Typhoon series, Apollo, 57i or OEM replacements. There are approx 500 different types of filters for rotarys here, universal staright and tapered.

Racing Beat Induction & Exhuast

Racing Beat with their many years expirience with rotary cars have worked closely with Mazda USA and many other top tuning companies, developing, testing and manufacturing performance and reliability upgrades for your rotary car. This section contains products from their Indusction and exhaust range. Racing Beat REVi Intake, REVi Ram Air Duct, REVi8 Exhaust systems, Racing Beat CAT replacment pipes, Racing Beat Racing exhuast system, Rotor Muffler REV25 and REV 30, Racing Beat RX8 and RX7 headers and manifolds.

Online Catalogue | Engine & performance | Induction & Exhaust

Visit our new forum www.rotarycommunity.com