Universal windscreen heater switch kit, ideal for the RX7 or RX8. Small discrete steel button to active the relay timer. Kit complete with Maxi fuse holder, Maxi fuse holder bracket and Maxi 30amp fuse.
find out more

RX7 heater switch kit

£72.85

Mazda RX7 windscreen heater switch kit. Using genuine Maxda RX7 FD switch for that factory fitment look, Kit complete with Maxi fuse holder, Maxi fuse holder bracket and Maxi 30amp fuse.
find out more

Heated rear screen switch

£41.03

Genuine Mazda RX7 FD heated rear screen switch, can also be used for the heated front screens we offer.
find out more

Maxi fuse holder

£7.64

Maxi fuse holder 4-6 mm
find out more

Best Sellers

Carbonetic Single pro carbon clutch Mazda RX7 FD3S

£955.45

Carbonetic Single pro carbon clutch Mazda RX7 FD3S. Complete inc lightened flywheel.
Choice of 2 clamping force plates 1300kg or 1600kg
Approx 500 bhp rating
There is a massive 5.25 kg weight saving between an Exedy single clutch and this Carbonetics clutch.
find out more

Carbonetic Blade for Mazda RX7 FD3S

£323.13

Carbonetic BLADE has been developed to provide an uprated clutch, with a stock feel at an OEM price. Clutches dont get any better than this. Specifically designed to fit in to your already fitted stock cover of your Mazda RX7 FD3S.
Approx BHP rating to 440bhp.
find out more

Carbonetic S-Spec front pad for RX7 FD

£119.15

Carbonetic S-Spec front pad for RX7 FD3S
CARBONETIC SUPER STREET pad is designed to improve overall braking performance of any street vehicles. SUPER STREET pad is developed for street and light track use where initial stopping power and resistance to fade is of prime importance. In addition to reducing brake dust and squeal, these long-lasting pads help keep rotor wear to minimum.

Applicable Rotor Temp
0-500 degrees C
Friction Coefficient
0.32-0.42
find out more

Magnecor 8mm leads for mazda RX7 FD 8bit UK

£46.99

Magnecor 8mm leads for mazda RX7 FD 8bit UK
Original equipment replacement.Designed to improve original ignition system performance on road vehicles using either electronic engine management systems or carburetors.Ideal for LPG gas conversion engines.Excellent RFI and EMI suppression.Flexible high-strength all silicone construction.
These are almost identical in length to the 16bit but have a straight cap where it connects to the coils.
Lead lengths approx, centre of cap to centre of cap each end.
T1 = 22cm, T2 = 28cm
L1 = 28cm, L2 = 33cm
find out more

RotaryArt full block kit

£178.06

RotaryArt full block kit: comprising of coolant seals, 4 inner and 4 outer square, dowell O rings 4 total , front cover O ring 1 total, oil filter base O rings 2 total, 20 total thrubolt O rings, rear stationary gear O ring 1 total and the oil control O rings 4 inner green and 4 outer black.

find out more

East Caost Parts 13b 2mm ALS Apex seals

£362.02

East Caost Parts 13b 2mm ALS Apex seals. Designed to be unbreakable so no engine damage if it lets go under pressure and designed to compliment there lightweight billet rotors.
find out more

Fuel pump 044

£111.63

Bosch in tank fuel pump, should push 200 ltrs per hr & will support up to approx 600 bhp
find out more

Used Front drivers seat.

Used Front drivers seat, carbon fibre effect material or velour. and leather
find out more

Mazda RX8 ignition coil

£64.63

Genuine Mazda RX8 ignition coil. These are a known problem for their short life span, and some customers now treat these as a consumable, checking them at every service. Priced each, all four should be checked.
We are now able to offer these at almost half the Mazda recommended retail price and on average you will save approx £170 on a set.
find out more

Visit our new forum www.rotarycommunity.com

East Coast Parts Distribution

East Coast Parts have appointed RotaryArt as sole UK & European distributors for their complete product range.
East Coast Parts are pioneering a wave of new rotary parts never seen before on rotaries. Their unique and innovative ideas will I’m sure pave the way for more powerful and efficient rotary’s.
Products include new unbreakable seals, lightweight billet rotors, manifols, throttle bodies amd much more.

Light weight rotors

Coming real soon lightweight billet rotors, so far tests have proven the ability of these great performance additions.

Drag car has used and tested these with 7 sec passes and on strip down the rotors have looked as new with no visible damage.

A 500 bhp street car has used these again on first strip down after 600 miles, results look great. car has now been put back together for further mileage and testing.

New big test is the Sebring 24hr where the rotors will be tested for endurance....

These with the right mods should allow your car the rev to 14,000 - 15,000 RPM and could contribute to 15 - 20% more fuel efficiency.

Un-breakable apex seals

Tried and tested and work perfectly with their lightweight billet rotors, Eat Coast Parts have developed their own range of un-breakable apex seals to compliment the billet rotors.

Visit our new forum www.rotarycommunity.com