Carbonetic Single pro carbon clutch Mazda RX7 FD3S. Complete inc lightened flywheel.
Choice of 2 clamping force plates 1300kg or 1600kg
Flywheel Weight 4.5KG
Complete 9.1 KG
Approx 500 bhp rating
There is a massive 5.25 kg weight saving between an Exedy single clutch and this Carbonetics clutch.
Please allow 800 miles for bedding in.
find out more

Carbonetic Blade for Mazda RX7 FD3S

£332.74

Carbonetic BLADE has been developed to provide an uprated clutch, with a stock feel at an OEM price. Clutches dont get any better than this. Specifically designed to fit in to your already fitted stock cover of your Mazda RX7 FD3S.
Approx 400 bhp rating. Blade disc 1.45KG
find out more

Carbonetic S-Spec front pad for RX7 FD

£122.96

Carbonetic S-Spec front pad for RX7 FD3S
CARBONETIC SUPER STREET pad is designed to improve overall braking performance of any street vehicles. SUPER STREET pad is developed for street and light track use where initial stopping power and resistance to fade is of prime importance. In addition to reducing brake dust and squeal, these long-lasting pads help keep rotor wear to minimum.

Applicable Rotor Temp
0-500 degrees C
Friction Coefficient
0.32-0.42
find out more

Magnecor 8mm leads for mazda RX7 FD 8bit UK

£46.99

Magnecor 8mm leads for mazda RX7 FD 8bit UK
Original equipment replacement.Designed to improve original ignition system performance on road vehicles using either electronic engine management systems or carburetors.Ideal for LPG gas conversion engines.Excellent RFI and EMI suppression.Flexible high-strength all silicone construction.
These are almost identical in length to the 16bit but have a straight cap where it connects to the coils.
Lead lengths approx, centre of cap to centre of cap each end.
T1 = 22cm, T2 = 28cm
L1 = 28cm, L2 = 33cm
find out more

RotaryArt full block kit

£178.06

RotaryArt full block kit: comprising of coolant seals, 4 inner and 4 outer square, dowell O rings 4 total , front cover O ring 1 total, oil filter base O rings 2 total, 20 total thrubolt O rings, rear stationary gear O ring 1 total and the oil control O rings 4 inner green and 4 outer black.

find out more

East Caost Parts 13b 2mm ALS Apex seals

£362.02

East Caost Parts 13b 2mm ALS Apex seals. Designed to be unbreakable so no engine damage if it lets go under pressure and designed to compliment there lightweight billet rotors.
find out more

5ltr Dexelia Ultra 5w30

£41.03

Dexelia oils are the only oil recognised by Mazda for the use in there RX8. Any other oil could void the manufacturers warentee.
find out more

1ltr Dexelia Ultra 5w30

£9.20

Dexelia oils are the only oil recognised by Mazda for the use in there RX8. Any other oil could void the manufacturers warentee.
find out more

Mazda RX8 ignition coil

£64.63

Genuine Mazda RX8 ignition coil. These are a known problem for their short life span, and some customers now treat these as a consumable, checking them at every service. Priced each, all four should be checked.
We are now able to offer these at almost half the Mazda recommended retail price and on average you will save approx £170 on a set.
find out more

Visit our new forum www.rotarycommunity.com

Carbonetic

RotaryArt and RoTechniks now have sole UK rights to distribute the great new and inovative range of products for the rotary car by Carbonetics. Carbonetics part of the Across group.
Carbonetic

Performance Tested Seals.

Rotaryart are now the sole UK & European distriutors for the apex seals of champions.
Performance Tested Seals (PTS) have developed a product especially for you that are guaranteed not to break in an engine, giving you an advantage over other racers.
Seals do not wear the housings or rotors.
Tested under race conditions, high boost and high RPM.
Seals available for 2mm and 3mm for 12a, 13b and 20b rotary engines.
Trade enquiries welcome.
PTS Apex seals

East Coast Parts

East Coast Parts have appointed RotaryArt as sole UK & European distributors for their complete product range.
East Coast Parts are pioneering a wave of new rotary parts never seen before on rotaries. Their unique and innovative ideas will I’m sure pave the way for more powerful and efficient rotary’s.
Products include new unbreakable seals, lightweight billet rotors, manifolds, throttle bodies and much more.
East Coast Apex seals

Royal Purple oils.

Royal Purple is becoming as successful in the UK as it is in the USA.
Royal Purple has been involved with teams in the following championships since its introduction to the UK. British F3 Championship, British GT Championship, British Superbike Championship, FIA World Sportscar Championship, Ferrari Marinello Championship, World Powerboat Championship, British Rally Championship.
Trade enquiries welcome.
Go to Royal Purple

TORQline

Rotaryart are now our exclusive distributors for our new carbon propshafts, developed with them for cars running a torque rating up to 3000 (NM).
-The composite prop will save 2.15kg over the standard solution, a massive 35% less than stock. Although this does not sound astonishing at a first glance it is rotating inertia (mass) we are saving and should provide a noticeable benefit to the driver. This will help during hard acceleration and pickup, it may also have a positive effect during heavy braking scenarios due to the reduced rotating mass to slow down.
-The composite prop will also add to the dampening of the driveline. Where high tuned car produce massive torque spikes that can damage gearboxes, diff etc. The CTG TORQline composite prop will actually twist slightly and absorb much of the shock loading into other components, it will also smooth the delivery of the power to the wheels.
Carbon props

K&N Filters,

Rotaryart are authorised distributors of K&N air filters, so confident are we of there superior quality and performance gains, they are the only fitler systems we stock. And if they are good enough for Abel Ibarra.
Trade enquiries welcome.
K&N Filters

DIY-RE DVD series.

DIY-RE Productions are pleased to introduce the new release series of DIY-RE 13B Do it yourself, Rotary Engine DVD’s.
This series of DVD’s offers a step-by-step, guide to rebuilding a Mazda Rotary engine, using genuine Mazda parts and specifications.
The Do-It-Yourself Rotary Engine series has been 5 years in the making.
Trade enquiries welcome.
DIY-RE

Visit our new forum www.rotarycommunity.com