Carbonetic Single pro carbon clutch Mazda RX7 FD3S. Complete inc lightened flywheel.
Choice of 2 clamping force plates 1300kg or 1600kg
Flywheel Weight 4.5KG
Complete 9.1 KG
Approx 500 bhp rating
There is a massive 5.25 kg weight saving between an Exedy single clutch and this Carbonetics clutch.
Please allow 800 miles for bedding in.
find out more

Carbonetic Blade for Mazda RX7 FD3S

£332.74

Carbonetic BLADE has been developed to provide an uprated clutch, with a stock feel at an OEM price. Clutches dont get any better than this. Specifically designed to fit in to your already fitted stock cover of your Mazda RX7 FD3S.
Approx 400 bhp rating. Blade disc 1.45KG
find out more

Carbonetic S-Spec front pad for RX7 FD

£122.96

Carbonetic S-Spec front pad for RX7 FD3S
CARBONETIC SUPER STREET pad is designed to improve overall braking performance of any street vehicles. SUPER STREET pad is developed for street and light track use where initial stopping power and resistance to fade is of prime importance. In addition to reducing brake dust and squeal, these long-lasting pads help keep rotor wear to minimum.

Applicable Rotor Temp
0-500 degrees C
Friction Coefficient
0.32-0.42
find out more

Magnecor 8mm leads for mazda RX7 FD 8bit UK

£46.99

Magnecor 8mm leads for mazda RX7 FD 8bit UK
Original equipment replacement.Designed to improve original ignition system performance on road vehicles using either electronic engine management systems or carburetors.Ideal for LPG gas conversion engines.Excellent RFI and EMI suppression.Flexible high-strength all silicone construction.
These are almost identical in length to the 16bit but have a straight cap where it connects to the coils.
Lead lengths approx, centre of cap to centre of cap each end.
T1 = 22cm, T2 = 28cm
L1 = 28cm, L2 = 33cm
find out more

RotaryArt full block kit

£178.06

RotaryArt full block kit: comprising of coolant seals, 4 inner and 4 outer square, dowell O rings 4 total , front cover O ring 1 total, oil filter base O rings 2 total, 20 total thrubolt O rings, rear stationary gear O ring 1 total and the oil control O rings 4 inner green and 4 outer black.

find out more

East Caost Parts 13b 2mm ALS Apex seals

£362.02

East Caost Parts 13b 2mm ALS Apex seals. Designed to be unbreakable so no engine damage if it lets go under pressure and designed to compliment there lightweight billet rotors.
find out more

5ltr Dexelia Ultra 5w30

£41.03

Dexelia oils are the only oil recognised by Mazda for the use in there RX8. Any other oil could void the manufacturers warentee.
find out more

1ltr Dexelia Ultra 5w30

£9.20

Dexelia oils are the only oil recognised by Mazda for the use in there RX8. Any other oil could void the manufacturers warentee.
find out more

Mazda RX8 ignition coil

£64.63

Genuine Mazda RX8 ignition coil. These are a known problem for their short life span, and some customers now treat these as a consumable, checking them at every service. Priced each, all four should be checked.
We are now able to offer these at almost half the Mazda recommended retail price and on average you will save approx £170 on a set.
find out more

Visit our new forum www.rotarycommunity.com

CG-Lock

Online Catalogue | Safety | CG-Lock

CG-Lock

Price: £37.50 (£44.06 Including VAT at 17.5%)

Engineered and proven to keep drivers and occupants firmly planted in their seat; virtually anyone, under a wide variety of driving situations, will benefit from adding the CG-Lock to their vehicle's factory-installed seat belts. Testing has proven that the CG-Lock can dramatically increase driver stability, control and comfort. Improved occupant comfort means reduced back fatigue in strenuous or prolonged driving.
Special introductory offer,
all deliveries are FREE to mainland UK.
Installation video

CG-Lock

Price: £37.50 (£44.06 Including VAT at 17.5%)

The CG-Lock is designed to fit most vehicles. The CG-Lock is not designed however to work with vehicle seat belt systems that use a multi-pass seat belt tongue. Please see the illustration below. We are currently working on a future version of the CG-Lock that will be compatible with multi-pass seat belt tongues.
Please click on the picture to see if your belt is a single or double pass buckel.
Special introductory offer,
all deliveries are FREE to mainland UK.
Installation demo

CG-Lock

Price: £37.50 (£44.06 Including VAT at 17.5%)

Quite simply! When sitting in a car, your hips become your Centre of Gravity. By securing your centre of gravity, you are more "at one" with your vehicle. CG-Lock simply attaches to the tongue of your existing seat belt, allowing you to secure the lap belt section of your existing seat belt.
Once installed, pulling up on the shoulder harness tightens the lap belt portion - keeping it at the desired tightness until you release it. The shoulder harness however remains unrestrained as normal for maximum arm and upper body movements.
Special introductory offer,
all deliveries are FREE to mainland UK.
Installation guide PDF

Online Catalogue | Safety | CG-Lock

Visit our new forum www.rotarycommunity.com