Online Catalogue

View Basket | Checkout | Items:, Value:

spacer
spacer

New Products

RX8 side seals

RX8 side seals

Genuine Mazda RX8 side seals.
The RX8 rotor comes with letters on the side face, this determines the length. These are to fit numbers F, G, H & I

find out more

£26.39

Mazda RX7 FD3S front drop link (L)

Mazda RX7 FD3S front drop link (L)

RotaryArt front drop link left hand side - near side for Mazda RX7 FD3S.

find out more

£38.36

Mazda RX7 FD3S front drop link (R)

Mazda RX7 FD3S front drop link (R)

RotaryArt front drop link right hand side - off side for Mazda RX7 FD3S.

find out more

£38.36

RX8 side seals (extra long)

RX8 side seals (extra long)

Alternatively these side seals are the longest which you would HAVE to clearance yourself to fit. So if unsure of the lettering on your rotors or if using RX8 rotors in early 13B conversions you can use and clearence these yourself.

find out more

£27.26

Steering shaft UJ (upper)

Steering shaft UJ (upper)

Genuine Mazda RX7 FD3S upper steering colum UJ. This part has a sliding section and pin that is designed to break on an impact and often wears out and breaks. This will sharpen steering and remove excessive play.

find out more

£135.98

RX8 side seals

RX8 side seals

Genuine Mazda RX8 side seals.
The RX8 rotor comes with letters on the side face, this determines the length. These are to fit numbers J, K, L & M

find out more

£21.24

spacer

Visit our forum www.rotarycommunity.com

Bonnet accessories

Online Catalogue | Aero & Styling kits | Exterior styling |  Bonnet accessories

Tein Bonnet damper RX7

Tein Bonnet damper RX7


Price: £100.00 (£120.00 Including VAT at 20%)

Tein Bonnet damper RX7 FD

Tein Bonnet damper RX8

Tein Bonnet damper RX8


Price: £110.00 (£132.00 Including VAT at 20%)

Tein Bonnet damper RX8
Bonnet raised at hinge side by approx 3mm from OEM position

Top fit non locking catch

Top fit non locking catch


Price: £29.95 (£35.94 Including VAT at 20%)

These are fixed from the top with screws so are not truely flush fitting, but are quick and easy to install.

Top fit locking catch

Top fit locking catch


Price: £33.55 (£40.26 Including VAT at 20%)

These are fixed from the top with screws so are not truely flush fitting, but are quick and easy to install.

Flush non locking catch

Flush non locking catch


Price: £29.95 (£35.94 Including VAT at 20%)

These are fixed from below by bonding to the bonnet so are truely flush fitting. More care needs to be taken in the cut out and installation.

Flush locking catch

Flush locking catch


Price: £33.55 (£40.26 Including VAT at 20%)

These are fixed from below by bonding to the bonnet so are truely flush fitting. More care needs to be taken in the cut out and installation.

Locking flush fitting bonnet locks

Locking flush fitting bonnet locks


Price: £14.50 (£17.40 Including VAT at 20%)

Locking bonnet pins, flush fitting finished in hard wearing chrome

flush fitting bonnet locks quick release

flush fitting bonnet locks quick release


Price: £6.32 (£7.58 Including VAT at 20%)

Non locking quick release bonnet pins, flush fitting finished in hard wearing chrome

Stainless Steel Competition bonnet pins

Stainless Steel Competition bonnet pins


Price: £12.00 (£14.40 Including VAT at 20%)

Stainless steel bonnet pins, competition pins, quick release.

Ali Competition bonnet pins

Ali Competition bonnet pins


Price: £11.75 (£14.10 Including VAT at 20%)

colours

Ali bonnet pins, competition pins, quick release.

Recessed bonnet pin cups

Recessed bonnet pin cups


Price: £7.00 (£8.40 Including VAT at 20%)

For a truely professional look use the cups with your existing bonnet pins and create a areodynamic fitting bonnet pin, for use with Ali and Stainless competition pins above.
Available in black & silver

Spoiler & splitter steady bars

Spoiler & splitter steady bars


Price: £9.24 (£11.09 Including VAT at 20%)

Spoiler & splitter steady bars, supplied in pairs and can be used for reducing vibration and movement in froont splitters and spoilers.

Adjustable spoiler & splitter steady bars

Adjustable spoiler & splitter steady bars


Price: £11.90 (£14.28 Including VAT at 20%)

2 way adjustable spoiler & splitter steady bars, supplied in pairs and can be used for reducing vibration and movement in froont splitters and spoilers.

Online Catalogue | Aero & Styling kits | Exterior styling |  Bonnet accessories

Visit our forum www.rotarycommunity.com

spacer
spacer